DESMI Marine Pumps:
Vertical In-line - type NSL
The NSL range is a series of sturdy and reliable pumps, and the development of the pumps has been based on the latest methods for the calculation of strength and optimum performance.
| Capacity Range: | 2-1800 m³/h |
| Pressure Range: | 5-220 mWC |
DESMI's NSL pump is a further development of the well-known SL pumps which have been supplied for marine and industrial applications for more than thirty years.
Design Features
The pump is a vertical in-line, radialy split, single-stage centrifugal pump with connecting flanges according to international standards. The pump is designed for mounting with electric motors having different international flange dimensions.
The supreme performance is secured by casing design optimizing, impellers with double-curved blades and replaceable wear rings.
In order to achive maxuimum flexiblity when installing the pump, the casing is supported by a square baseplate. If the pumps (especially small pumps) are mounted directly in the piping system, the baseplate can be omitted.
The bearing unit is equipped with sturdy ball bearings and the small types are fitted with lifetime-lubricated bearings. In the larger types the lower bearing is a double bearing for which a lubrication point is provided. A shaft in stainless steel with mechanical shaft seal of an approved make is standard.
The widest possible degree of standardization of components has been a major aim in the development of the series and resulted in the use of several common parts covering the range. The result of this standardization is a minimum demand for emergeny stock on-board.
